Hi Joe,
its fine.
For all users: I’ve described something here.
In short: all from the feeding line over the TRX until the Compressor acts as one side of a “dipole” and the Mic cable with the Op as the other side. The Compressor is located in the “middle” and is feeded with RF by this “dipole”.
I’ve decided to make a CMC between the feeding coax and the TRX (or the ATU). My Coax is DXW 174 with a diameter of only 2.9 mm. So I need only a small and light toroid for 4 or 5 turns of this cable.
For 4 or 5 turns of a IT-cable you need a larger toroid with more weight.
It works fine for 5 W. If I’m using my PA with 40 W mostly I have to switch of my Compressor.
73 Ludwig