Collaboration with Paul, VK3HN, has resulted in several hardware projects related to SOTA and POTA. It is time to publish them on a website spota-labs.com
The name SPOTA stems from the development of a single-channel CW transceiver. My question back then was: How do I manage to get into a QSO on a fixed frequency? The answer was simple: by getting a „spot“ via my beloved SOTA or POTA—or „SPOTA“ for short.
The SPOTA-LABS project began when Paul (VK3HN) asked—kindly yet persistently—about the development status of my SPOTA ONE. I had actually already abandoned the prototype, as the prospect of building it using „Manhattan-style“ construction (without a printed circuit board) held little appeal.
A friendship quickly developed following our initial contacts. Paul is highly experienced in PCB design, and this opened up a whole new world for me—marking a major milestone in my history as a hobbyist.
That is how our first joint project SPOTA ONE came to be.
This site serves solely to document our DIY projects. There are no commercial intentions whatsoever.
Chris DL1CR Paul VK3HN
