The screen on my KX2 has started to display the CMP & ALC meter permanently and I can’t work out how to get it back to Power & SWR.
I’ve been through the menus and re-flashed the firmware. My guess is I have pressed a combination of buttons or that I’m just an idiot.
Hey Fraser, you didn’t mention if you already pushed the mic knob.
Yes, I have pressed it. It cycles WPM <> MIC Gain and that’s all. A long press shows Power.
I remember that it was helpful to use AM mode to switch back to normal display mode.
Then you might have cross mode enabled, it allows to transmit CW while listening in SSB, it’s hidden under the CW WGHT submenu
Awesome Carlo! That’s exactly what it was. Now fixed.