3 element vhf beam mounting

[M0HCU]

How about using a couple of 15mm Plastic Pipe Clips? and a bit of plastic chopping board?
That’s what I did for my 2m moxon (although your yagi may be a little heavier)

Home brew 2m Moxon (fairly lightweight)

Here is a rough guide to my home brew 2m Moxon (According to some old kitchen scales it weighed in at around 160g, my luggage ‘scales’ said .2kg, but it only shows up .1kg units ) I built it to take to ZL and VK, so the dimensions were for frequencies a little higher than the UK, although it seems to work fine here! It was made to be fairly easily changed from vertical to horizontal. (Although I do have to pull the mast down to do so) To build it I needed: A small plastic chopp…

Don
m0hcu